• SERVICES

    • 1. Coating Capabilities

      Internal Coating


      Epoxy Coating

      Diameter : 4 – 82 inch

      Capacity : 500.000 sqm / year


      Internal Cement Lining

      Diameter : 8 – 80 inch

      Capacity : 250.000 sqm / year


      External Coating


      Epoxy Coating

      Diameter : 4 – 110 inch

      Capacity : 750.000 sqm / year


      Fusion Bonded Epoxy

      Diameter : 4 – 64 inch

      Capacity : 900.000 sqm / year


      3 LPE / 3 LPP

      Diameter : 4 – 64 inch

      Capacity : 900.000 sqm / year

    • 2. Our coating & protection refers to the international standards

      Internal coating :

      • AWWA C210 : Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
      • API RP5L2 : Recommended Practice for Internal
        Coating of Line Pipe for Non-Corrosive Gas Transmission Service
      • AWWA C205 : Cement-Mortar Protective Lining and Coating for Steel Water Pipe – 4 inch and Larger – Shop Applied
      • SSPC-SP10/NACE NO.2 : Near-White Blast Cleaning
      • SSPC-SP1 : Solvent Cleaning
      • SSPC-PA2 : Measurement of Dry Paint Thickness with Magnetic Gages
      • ASTM D4417 : Standard Test Method for Field Measurement of Surface Profile of Blast Cleaned Steel 
      • ISO 8501-1 : Rust Grades and Preparation Grades of Uncoated Steel Substrates and of Steel Substrates After Overall Removal of Previous Coatings
      • ASTM D3559 : Standard Test Method for Measuring Adhesion by Tape Test

      External Coating :

      • AWWA C210 : Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
      • CAN/CSA Z245.20 : Plant-Applied External Fusion Bond Epoxy Coating for Steel Pipe
      • CAN/CSA Z245.21 : Plant-Applied External Polyethylene Coating for Steel Pipe
      • ISO 12944 : Paints and varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems
      • SSPC-SP10/NACE NO.2 : Near-White Blast Cleaning
      • SSPC-SP1 : Solvent Cleaning
      • SSPC-PA2 : Measurement of Dry Paint Thickness with Magnetic Gages
      • ASTM D4417 : Standard Test Method for Field Measurement of Surface Profile of Blast Cleaned Steel 
      • ISO 8501-1 : Rust Grades and Preparation Grades of Uncoated Steel Substrates and of Steel Substrates After Overall Removal of Previous Coatings
      • ASTM D3559 : Standard Test Method for Measuring Adhesion by Tape Test
      • ASTM D4541 : Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

    • Cold Rolled Coil

      Thickness : 0.25mm – 3.00mm

      Width : 500mm – 1270mm

      Weight : 20 Ton Max

      Length : -

      OD : 1800mm Max

      ID : 500mm – 800mm

    • Hot Rolled Coil

      Thickness : 0.90mm – 12mm

      Width : 500mm – 1550mm

      Weight : 25 Ton Max

      Length : -

      OD : 2200 Max

      ID : 500mm – 800mm

    • Stainless - Steel

      Thickness : 0.50mm – 4.00mm

      Width : 500mm – 1250mm

      Weight : 20 Ton Max

      Length : -

      OD : 1800mm Max

      ID : 500mm – 800mm

      3 LPE / 3 LPP

      Diameter : 4 – 64 inch

      Capacity : 900.000 sqm / year

    INSPECTION & TEST

     Various inspections and tests have been carried out on our products in step by step process to final products control, to ensure the quality and standard specification of our products. 
    (* depend on customer requirement)
    Share by: